Introducing the TriPollar STOP V

بواسطة Chloe Beveridge

Introducing the TriPollar STOP V

Introducing the TriPollar STOP V

As the exclusive UK retailer of TriPollar devices and after launching the STOP back in April 2018, we're excited to announce the launch of the brand new STOP V device. Incorporating the brands renowned Radio Frequency technology and innovating lifting technology, the STOP V truly is an all-in-one, go to anti-ageing beauty device.

WHAT IS THE TRIPOLLAR STOP V

This revolutionary face tightening device combines two potent technologies to create an unrivalled anti-ageing device. Coupling TriPollar Radio Frequency Technology with Dynamic Muscle Activation (DMA), the device works to renew and regenerate the skin whilst reduces the appearance of fine lines and wrinkles. This first class device produces real, noticeable results in just a few weeks and allows you to get professional level aesthetic results from the comfort of your own home.

Introducing the TriPollar STOP V

HOW TO USE THE TRIPOLLAR STOP V

There are two functions on the STOP V, Radio Frequency and DMA. When using the device, the green lights indicate the setting is on Radio Frequency and when the lights are blue, it indicates the DMA technology is activated.

Using the Radio Frequency Setting

  1. To get started, cleanse the face or targeted treatment area and apply the TriPollar STOP Preparation Gel.
  2. We recommend starting with the low level, which is indicated by one green light on the top of the device. If you wish for a higher strength, simply press the button again, so two green lights show.
  3. Place the electrodes against your skin and apply slight pressure.
  4. Slowly move the device in circular movements over each treatment area, heating your skin to the optimum temperature.
  5. Keep all four electrodes in contact with the skin at all times. Repeat until the orange light shows and the sound indicator beeps and move to an adjacent area.
  6. As you move away from the previous area, do go back and repeat to ensure the skin remains at optimum temperature.
  7. An entire facial treatment should take around 20 minutes.

Introducing the TriPollar STOP V

Using the DMA Setting

This setting can be used in addition to the Radio Frequency setting or on it's own.

  1. To get started, cleanse the face or targeted treatment area and apply the TriPollar STOP Preparation Gel.
  2. We recommend starting with the low level, which is indicated by one blue light on the top of the device. If you wish for a higher strength, simply press the button again, so two blue lights show.
  3. Place the electrodes against your skin and apply slight pressure.
  4. Slowly move the device in upward movements over the jawline only. The maximum movement should be from just under your jaw, to just below your cheekbones.
  5. You will here a clicking noise and a slightly hot, tingling sensation, this is completely normal.
  6. Keep all four electrodes in contact with the skin at all times.
  7. An entire facial treatment should take around 20 minutes.

Introducing the TriPollar STOP V

This helpful tutorial video, shows you a step by step guide to using the STOP V.

WHAT RESULTS WILL I SEE WITH THE TRIPOLLAR STOP V?

You should start to see reduction in the appearance of fine lines and wrinkles, along with enjoying skin that feels tighter, firmer and renewed.

For best results you should use the TriPollar STOP V 2 -3 times a week for around 6 - 8 weeks. To maintain your results in the long term, repeat your treatments for around 2 - 4 times a month or as needed.

WHO SHOULD NOT USE THE TRIPOLLAR STOP V

Do not use TriPollar STOP if any of the following apply to you: Under 18 years of age. Have a pacemaker or internal defibrillator. Have metal implants in the treatment area. Current or history of cancer. Severe concurrent conditions such as cardiac disorders. Pregnant or nursing. Impaired immune system. Any diseases stimulated by heat, such as recurrent Herpes Simplex. Any active skin condition within the treatment area, such as sores, psoriasis, eczema or rash. History of keloid scarring, abnormal wound healing or fragile skin. Any surgical procedure, laser resurfacing or deep chemical peeling within the treatment area in the past 3 months. If you have permanent fillers within the treatment area. If you have temporary dermal fillers within the treatment area. Current use of medications, herbal preparations, vitamins or food supplements that may cause fragile or dry skin.

It's important to not that you should not use the TriPollar STOP V on the eyelids, over closed eyes, ears or genitals.

Shop TriPollar STOP V

المنشور السابق

How to Use The Clarisonic Mia Smart and New Brush Heads

المنشور التالي،

New In - Have You Seen What's Landed This Month at CurrentBody?